|Home||» Products||» Metal Cutting Horizontal Band Saw Machine||» 1500 TCSA Semi Automatic Band Saw Machine|
Twin Column Metal Cutting Semi Automatic Band Saw Machine
MMT - 1500 TCSA Technical Specification
Cutting Capacity: - Square - 1500x1500mm, Flat – 1550x1500mm & Round – Ø 1500mm.
Clamping Capacity:- Ø200mm. to Ø1500mm.
Cutting Accuracy & Cut Face:- Ø100mm ± 0.1mm.
Cutting Speed: - 20 to 100 mtr./min.
Hardness to be cut: - 70 to 350 BHN.
Maximum weight can be placed on the machine:- 18Tons.
Bi-Metallic Band Saw Blade: - 16300x 80 x 1.6 mm
Floor area for machine:- 7015x2440mm.
Infinitely variable pressure controlled cutting feed and upward return rapid movement by hydraulic cylinder.
Automatic height adjustment for saw frame to save cycle time.
Tungsten carbide face guides with ball bearings.
Adjustable & Movable Dovetail type Heavy duty Movable Blade guide.
Separate Bearing housing being provided to absorbed the axle load due to hydraulic tensioning.
Tachometer use for running at the proper band speed is essential for optimum blade life.
Hydraulic Blade tension and tension releases, no sooner machine is off to minimize fatigue stresses.
Hydraulic band tension with pressure gauge.
Hydraulic Main vice with Double Acting Hydraulic Cylinder.
Double Cylinders in Up down Motion for smooth running.
Chips removing wire brush for band cleaning.
Electrically driven Swarf Conveyor with container for chips collection.
In built rear roller table for cut piece resting.
Strainer system used for coolant filtration.
Power pack and necessary component.
In built Control panel with all necessary switchgears, fuses indicators & push buttons & mounted on machine.
Saw motor - 20H.P.
Hydraulic motor - 3H.P.
Coolant Motor - 1 H.P. LHP Make
Supply - 440 V ± 10 % 50 Hz, 3 Phase A.C. IP 54.
If you need any further clarifications, please feel free contact to us.